Deutz 914 Informacje Techniczne Pobierz pdf (Strona 61)

6.5 Belt Drives Service and Maintenance

● Loosen bolts 1, 2 and 3 slightly.

● Press alternator 4 outwards in direction

of arrow A until correct belt tension is

achieved.

● Retighten bolts 1, 2 and 3.

Check, tension and change belts

only with the engine off. Rein-

stall V-belt guard.

● Remove fan belt, as shown in 6.5.2.

● Slacken off bolts 1, 2 and 3.

● Swing alternator inwards in the direction

of arrow B.

● Remove and replace belt.

● Swing alternator 4 outwards in direction

of arrow A until correct belt tension is

achieved.

● Retighten bolts 1, 2 and 3.

● Fit fan belt.

Retension V-belt after it has ran for 15 min-

utes.

● When the V-belt is torn, the pressure pin 1

of electrical switch is actuated by the

tension roller and an audio signal or a light

signal is emitted.

● Check the function by pressing pin 1.

Only check function when the

engine is off!

6.5.3 Alternator belts 6.5.5 Check warning system6.5.4 Change alternator belt

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 84 85

Brak uwag

Deutz 914 Informacje Techniczne Strona 61